CNC SCREEN® on FIELD is a hybrid application compatible with FANUC's FIELD system. The operating status of FANUC ROBODRILL, CNC, etc. can be monitored on the GUI screen on the FIELD system. In addition, it has a complementary relationship with CNC SCREEN® iOS / Andoroid, and you can easily check indoors / outdoors using Wi-Fi / VPN and accurately report the operation with the capture function. In addition, by using AXIZ CNC SCREENR® iOS / Andoroid together, detailed data can be acquired, and your company will be promoted to IoT.
AXIZ CNC SCREEN® iOS / Andoroid is now available.



 



 

e.g. FANUC Series 31i-MODEL B5 with data server
Please check the IP ADDRESS and SUBNET MASK from ROBODRILL-System screen. In addition, check the PORT number from FOCAS setup screen. Use the FIELDsystem CNC converter etc. to set CNC SCREEN® on FIELD. You will need a BOX with FIELD system set. We accept IoT integration.
※ For OPC UA / MTConnect connection, the settings on the FIELD system side are required.







 

PROCEDURE 1

You can switch to the detailed screen from the general monitoring screen with just a click.

PROCEDURE 2

Supports simultaneous browsers on multiple screens.

PROCEDURE 3

Detailed operating rate for each group can be confirmed.

PROCEDURE 4

The Gantt chart can display accumulated data up to 360 days.

PROCEDURE 5

CNC screen is projected. You can perform one-touch capture by pushing the right upper “camera logo” for 5 seconds.
In addition, we are developing a turret monitoring function, a courant monitoring function now.

Wi-Fi / VPN As for the detailed connection method, there is a difference according to customer's environment, so please fill in details and contact by e-mail.

 


※ A delay occurs for the indication of the smartphone because of the transmission rate than real CNC screen.
※ Depending on the communication speed, the display on the CNC SCREEN® on FIELD may be delayed from the actual CNC screen.
※ For secondary obstacles ( A machine, Repair with damage such as the work , Security for accidents
resulting in injury or death ) about this service, we do not take responsibility at all.
※ When you hope for a custom function for this service more, please refer to us.
※ Built-in Ethernet, multifunction Ethernet, Ethernet board Installed required.
※ Fast Ethernet Board, Data Server Board, Fast Data Server Board Installed Required.
※ CNC SCREEN® on FIELD is developed based on ROBODRILL iD,iF,DiA,DiB.
※ Please note that depending on your FANUC CNC, it may not be displayed correctly.

 Compatible models
・FANUC Series 15i-MODEL A/B
・FANUC Series 16i/18i/21i-MODEL A/B
・FANUC Series 30i/31i/32i/35i-MODEL B
・FANUC Series 30i/31i/32i-MODEL A
・FANUC Series 0i-MODEL B/C
・FANUC Series 0i-MODEL F
・FANUC Series 0i-MODEL D
・FANUC Series 30i/31i-P MODEL B
・FANUC Series 30i/31i-L MODEL B
・FANUC Power Motion i-MODEL A
・FANUC Power Mate i-MODEL D/H
・FANUC Series 31i-W MODEL B


Developer:AXIZ ENGINEERING CO.,LTD
5-4-16, Shinmachi, Hino-shi, Tokyo 191-0002, JAPAN
URL:www.CNCSCREEN.com URL:www.MT-LINKi.com  URL:www.ROBODRILL-LINKi.com
URL:www.FANUC-ROBODRILL.com URL:www.FIELDsystem.inc
MAIL:cnc_screen@axiz.in